Printing to MFP with two-page pdf file that requires 1 page on colored paper.

How do I print two page pdf file to MFP, copier, using two different pages, color or weight?
  • Open pdf document
  • Ctrl P or select Print using the file tab
  • Check 4 Area on the window below
    • (1) Yccd-print is select as the driver (This might not be the same as this sample)
    • (2) Make sure all Pages to Print is selected
    • (3) Select Actual size in the Page Sizing & Handling area
    • (4) Now select Properties

Image of beginning pdf window

  • After properties is select on the window above
  • Select the Layout tab on the top left
    • Select single sided,

Image of select Layout

  • Select the basic tab, top left corner,
    • Select Tray3 and Plain Paper in the Paper Tray and Paper Type areas

Image of basic tab to select main paper

  • Select Cover Mode tab at top of window
  • Make sure Back Cover is checked
  • Select Print in the pull down under Back Cover
  • Select Tray2 in the Back Cover Tray

Image of  Cover Mode and selecting back cover as second page paper

  • If the color paper page is the one page, you will do same selections as the above picture, ONLY click in the Front Cover area
  • Select OK will close window
    • Select 1 copy
    • Suggest that a test print is proofed before sending any larger quantities
  • Select Print will send the job to your folder
  • Do not close the document until you have tested
  • Put the paper needed into the trays you are using (selected in the properties of the print driver)
  • Make sure paper in the machine trays match the color needed for the job
  • Log into the MFP again and release the job.
    • If correct you can add the quantity needed to the first window of the driver at your computer
    • The driver will retain the setting if you have not closed the pdf file

Need further assistance? 

Additional Resources


Article ID: 151953
Mon 10/24/22 3:17 PM
Tue 10/25/22 11:39 AM